Incorporate CO Detectors Into Your Home’s Security

Putting carbon monoxide detectors in your residence is a fantastic start, but you can elevate your defense even more by incorporating them into your security system. By doing so, you’ll have an additional safeguard, as your monitoring agents will receive notification any time a CO detector sounds. This backup can be critical, especially if a disaster takes place in the early morning hours and you aren’t awakened by the alarm.

Include CO Detectors In Dayton With Your Home Security System

Protect your family against all sorts of risks with a full-featured home security package from Secure24 Alarm Systems. Our carbon monoxide and smoke alarms in Dayton are professionally monitored in the same manner as your other security components. You’ll enjoy backup from an attentive, 24-7 team in case an urgent event occurs. Call (937) 230-5750 today to improve the defense of your loved ones and home.

Residents must protect against various risks like burglary, fire, and flooding. But what about a risk that you aren’t able to smell or see? Carbon monoxide poses an uncommon challenge as you may never realize it’s there. Despite that, implementing CO detectors can effectively safeguard your loved ones and property. Learn more about this dangerous gas and where to place carbon monoxide detectors in your Dayton residence.

What Is Carbon Monoxide?

Referred to as the silent killer due to its absence of color, taste, or odor, carbon monoxide is a common gas caused by an incomplete combustion of fuels. Any appliance that utilizes fuels like a fireplace or furnace can produce carbon monoxide. Even though you usually won’t have problems, complications can arise when equipment is not frequently serviced or appropriately vented. These mistakes could result in an accumulation of this dangerous gas in your residence. Heating appliances and generators are the most frequent reasons for CO poisoning.

When in contact with low amounts of CO, you could suffer from headaches, dizziness, fatigue nausea, or vomiting. Extended exposure to higher levels may lead to cardiorespiratory arrest, coma, and death.

Recommendations On Where To Place Dayton Carbon Monoxide Detectors

If your home lacks a carbon monoxide detector, purchase one now. Preferably, you should install one on each floor of your home, including basements. Browse these recommendations on where to place carbon monoxide detectors in Dayton:

• Put them on every floor, specifically where you have fuel-burning appliances, like furnaces, water heaters, fireplaces, and gas dryers.
• Always have one within 10 feet of bedrooms. If you only have one CO detector, this is where to put it.
• install them approximately 10 to 20 feet away from potential CO producing appliances.
• Avoid affixing them right next to or above fuel-consuming appliances, as a bit of carbon monoxide might be released when they turn on and trigger a false alarm.
• Fasten them to walls at least five feet above the floor so they will test air where occupants are breathing it.
• Avoid installing them near doors or windows and in dead-air areas.
• Put one in areas above attached garages.

Inspect your CO detectors regularly and maintain them according to manufacturer recommendations. You will generally need to replace them every five to six years. You should also make sure any fuel-burning appliances are in in proper working order and appropriately vented.